The fault code P2463 indicates a problem with the diesel particulate filter. The diagnosis involves checking the filter for damage or blockage. The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue depends on the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour.
Brand new direct fit OEM replacement Diesel Particulate Filter (DPF) to suit Mazda 6 Diesel . This product is designed, developed and tested in Australia exclusively for the AUS and NZ market. The unit has been constructed using high quality Ceramic Diesel Oxidizing Catalyst (DOC) and a high-quality Cordierite substrate (DPF) to ensure an OEM
Diesel Particulate Filter Operation in Heavy Duty Diesel After Treatment Systems - On Highway
If the diesel particulate filter is replaced, this then has to undergo teach-in with XENTRY. Regeneration while driving is not necessary. In a warranty case all test results should be submitted along with the diesel particulate filter. 10. If no damage can be found to the diesel particulate filter, regeneration must be performed while driving
Diesel Particulate Filter. taffy056 Posts: 4,895 Forumite. 24 December 2011 at 4:57PM. Hiya guys, I have a Mazda 6 turbo diesel and the DPF light and management light has come on, its a high miler 85k on a 57 plate, I have run over it 2000 rpm for quite a few miles and its not cleared with regeneration, and was wondering my next step with this.
Rarely is it a faulty DPF, more often a bad sensor or DPF injector not allowing/commanding the normal regen to occur, thus causing excessive soot build up in the DPF. Once the cause is repaired any DPF can be manually cleaned and put back in service. 2020 Canyon CCLB 2.8L Duramax. SLT Nav/bose, skids..